• whatsapp +91 9611615001
  • Landline 0820-2589182, 183, 184
  • email info@sode-edu.in
  • CET CODE-E206

Journals

sode-edu.in \   Journals

Mechanical Engineering

Back to Journals
  1. Thirumaleshwara Bhat, Anil A. Sequeira and N. S. Sriram (2011) Modified Approach for Indirect Cutting Force Measurement for face Milling, International Journal of Innovative System Design and Engineering, International Institute of Science Technology and Engineering, ISSN: 2222-1727, Volume 2, 36-46pp.
  2. Thirumaleshwara Bhat and Anil A. Sequeira (2011) A Condition Monitoring System to Measure the Cutting Force using Data Acquisition SystemInternational Journal of Mechanical Engineering Research and Development (IJMERD), ISSN: 2228-9347, Volume 1, 19-22pp.
  3. Anil A. Sequeira, Thirumaleshwara Bhat and N. S. Sriram (2011) Statistical Modelling to Predict Surface roughness in Face Milling, Global Journal of Mechanical Engineering and Computational Science (GJMECS), Volume 1.
  4. Thirumaleshwara Bhat, M. Sudheer, K. M. Subbaya and Dayananda Jawali (2012)Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites, Journal of Minerals & Materials Characterization & Engineering,Volume 11, 193-211pp.
  5. Thirumaleshwara Bhat, M Sudheer, R Prabhu, and K Raju (2012)Optimization of Dry Sliding Wear Performance of Ceramic Whisker Filled Epoxy Composites Using Taguchi Approach, Advances in Tribology, Volume 2012, 1- 9pp.
  6. Anil A. Sequeira, RavikanthPrabhu, Dr.Thirumaleshwara Bhat and Dr. N. S. Sriram (2012)Effect of Cutting Force and Surface Roughness of Al Components using Face Milling Process-A Taguchi Approach, International Journal of Scientific Research, Volume 3, Issue 4, 7-13pp.
  7. Thirumaleshwara Bhat, Anil Antony Sequeira, RavikanthaPrabhu and N.S. Sriram, (2012) Effect of Cutting Parameters on Cutting Force and Surface Roughness of Aluminium Components using Face Milling Process- A Taguchi Approach, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), ISSN: 2278-1684, Volume 3, Issue 4, 07-13pp.
  8. ThirumaleshwaraBhat, Sudheer, RavikanthaPrabhu and  K. Raju(2013) Modelling and Analysis for Wear Performance in Dry Sliding of Epoxy/ Glass/ PTW Composites Using Full Factorial Techniques, ISRN Tribology, Volume 2013, 1-11pp.
  9. Thirumaleshwara Bhat, M Sudheer, KH Vishwanathan and K Raju (2013) Effect of potassium titanate whiskers on the performance of vacuum moulded glass/epoxy composites, Journal of Reinforced Plastics and Composites, Volume 32,1177-1187pp.
  10. Thirumaleshwara Bhat, Sudheer M, Sandesh Kubanooraya and RajuK (2013) Abrasive wear performance of Epoxy/Glass/PTW composites, Annual Research Journal, NMAM Institute of Technology, Volume 3, 36-42pp.
  11. Thirumaleshwara bhat, Mudradi Sudheer, Ravikantha Prabhu and Kandavalli Raju(2014) Effect of filler content on the performance of Epoxy/PTW Composites,Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2014, 1-11pp.
  12. Thirumaleshwara Bhat, Mudradi Sudheer, K. Hemanthand Kandavalli Raju (2014) Enhanced mechanical and wear performance of epoxy/glass composites with PTW/Graphite hybrid fillers, Procedia Materials Science, Volume 6, 975-987pp.
  13. Thirumaleshwara Bhat, RolvinD’Silva and G.Binu (2015) Performance and Emission Characteristics of a C.I. Engine fuelled with diesel and TiO2 nanoparticles as fuel additives, Science Direct, Materials Today: Proceedings 2, Volume, Issue , 3728-3735pp.
  14. RolvinD’Silva, Vinoothan K, Binu K. G., Thirumaleshwara Bhat and Raju K (2016) Effect of Titanium Dioxide and Calcium Carbonate Nanoadditives on the Performance and Emission Characteristics of C.I. Engine, Journal of Mechanical Engineering and Automation, 28-31pp.

- Dr. THIRUMALESHWARA BHAT

  1. Sudarshan Rao K, Taguchi and Neural Network Analysis for Predicting Abrasive Wear Behavior of Carbon Epoxy Composites. Recent Progress in Science and Technology Vol. 7, March 2023, 42–60. 
  2. Sudarshan Rao K, “Taguchi and Regression Analysis of Abrasive Wear Behavior of Carbon Epoxy Composite” Journal of Materials and Engineering, 01(2), 2023, 68-73.
  3. Sudarshan Rao K, “Dynamic mechanical behavior of unfilled and graphite filled carbon epoxy composites”, IOP Conference Series: Materials Science and Engineering 1126 (1), March 2021, 012033.
  4. Pranav Mohan, Sachin Salian, Sudarshan Rao K and Sharan, “Retractable stabilizer wheel supported bicycle”, International Journal of Mechanical and Production Engineering Research and Development Volume-10, Issue-3, June 2020, pp 6183-6188
  5. Abdul Nawaz, Leston Rihal D souza, Abhishek Kumar, Abdul Mohammaed Tabrez, Sudarshan Rao K, Design and Fabrication of Hybrid Multipurpose Solar Sprayer, International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 4, April 2017-pp-633-637 ISSN (Online) 2456-1290.
  6. Sudarshan Rao K, Y S Varadarajan and N. Kiran Bhat, OPTIMIZATION OF CONTROL PARAMETERS FOR MECHANICAL AND ABRASIVE WEAR BEHAVIOR OF GRAPHITE FILLED CARBON EPOXY COMPOSITE USING GREY RELATIONAL ANALYSIS, i-manager’s Journal on Material Science, Vol. 4 l No. 4 l  2017, 31-41.
  7. Sudarshan Rao K, Y S Varadarajan, M. L. Sudarshan and N. Kiran Bhat, PREDICTION OF ABRASIVE WEAR BEHAVIOR OF CARBON FABRIC REINFORCED EPOXY COMPOSITES USING TAGUCHI ANALYSIS AND NEURAL NETWORK, Journal of Basic and Applied Research International Volume 20 Issue 2, 2017, 84-95.
  8. Sudarshan Rao K, Y S Varadarajan and N Rajendra, Erosive wear behaviour of carbon fiber-reinforced epoxy composite, Materials Today: Proceedings 2 (2015) 2975 – 2983.
  9. Amith V, Sudarshan Rao K, Sushilendra Mutalikdesai, Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments, Journal of Materials and Metallurgical Engineering, Volume 4, Issue 2, 2014, 21-31.
  10. Sudarshan Rao K, Y S Varadarajan, N Rajendra, “Artificial Neural Network Approach for the Prediction of Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite”, Indian Journal of Engineering & Materials Sciences, Volume 21, Issue 1, 2014, 16-22.
  11. Sudarshan Rao K, Modelling and Analysis of Abrasive Wear Performance of Glass Epoxy Composites Using Taguchi Approach, International Journal of Metallurgical & Materials Science and Engineering (IJMMSE), Vol. 3, Issue 5, 2013, 19-28.
  12. Sudarshan Rao K, Y S Varadarajan, N Rajendra, Analysis of Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite using Taguchi Method, International Journal of Advanced Materials Science, Volume 4, Number 3 (2013), pp. 211-223.
  13. Sudarshan Rao K, Y S Varadarajan, N Rajendra, Investigation of the Abrasive Wear Behaviour of Graphite Filled Carbon Fabric Reinforced Epoxy Composite – A Taguchi Approach, International Journal of Mechanical Engineering and Technology (IJMET),  Volume 4, Issue 1, (2013), pp. 101-108.
  14. Sudarshan Rao K, Y S Varadarajan and N Rajendra, “Mechanical behavior of Graphite filled and unfilled Carbon Epoxy Composite”, CiiT International Journal of Automation and Autonomous Systems, Volume 3, No. 8 (2011), pp 368 – 375.

- Dr. SUDARSHAN RAO K

  1. Udayaprasanna H., Basavaraj M.V., ‘ Effect of austempering on the dry sliding wear behaviour of parent and weld metals of AISI 9260 High Silicon Steel’, Australian Journal of Mechanical Engineering  [ review awaited]
  2. Udayaprasanna H., Basavaraj M.V., ‘Effect of austempering on the creep behaviour of AISI 9260 high silicon steel and its welds’, Journal of Materials Science and Engineering [review awaited]
  3. Udayaprasanna H., Grampurohit R.D., ‘Some aspects of mechanisms and modelling of creep behaviour of 9 Cr-1Mo steels and their welds’, Indian Journal of Research in Commerce, Management, Engineering and Applied Science-ISSN 2454-6593- Vol.2, Issue No.10.pp-19 to 21
  4. Udayaprasanna H., Basavaraj M.V., ‘Tribological behaviour of silicon steel based weld joints’, Indian Journal of Research in Commerce, Management, Engineering and Applied Science-ISSN 2454-6593- Vol.1, Issue No.10.pp- 63 to 68
  5. Udayaprasanna H., Komalapur V.et.al., ‘Pre-form optimisation of autonomous under-water vehicle propeller for minimum flash’  , Indian Journal of Research in Commerce, Management, Engineering and Applied Science-ISSN 2454-6593- Vol.1, Issue No.10.pp-15 to 18
  6. Udayaprasanna H., Grampurohit R.D., ‘Study of steady state creep rates of 9 Cr-1Mo steel samples at 600 C temperature and 10 kg load’, International Journal of Technological Research in Engineering , Vol.3, Issue No.9.pp-23 to 34
  7. Udayaprasanna H., Grampurohit R.D., ‘Microstructural investigation of aged modified 9 Cr -1 Mo steel weld joints through SEM studies’, International Journal of Research in Engineering and Technology-ISSN 2319-1163- Vol.8, Issue No.4., pp.-11 to 16
  8. Udayaprasanna H., Grampurohit R.D., ‘Microstructural investigation of aged modified 9 Cr -1 Mo steel weld joints and correlating it with the creep behaviour’, Indian Journal of Innovative Research in Science and Technology- Vol.2, Issue No.10.pp-17 to 23
  9. Udayaprasanna H., Grampurohit R.D.,’ Evaluating creep damage of aged modified 9 Cr-1 Mo steel weld joints through indentation creep test methodology’- International Journal of Emerging trends in Science and Technology-Vol.3, No. 2, pp 36-43
  10. Udayaprasanna H., Udupa K.R., ‘ Indentation creep studies to evaluate the mechanical properties of stainless steel welds’, Australian Journal of Mechanical Engineering- ISSN 2204-2253, Vol. 14, Issue No.1, pp. 1-5
  11. Udayaprasanna H., Basavaraj M. V.,’ Effect of heat treatment on wear behaviour of high silicon steels’, Elixir international Journal, ISSN 2229-712X, Vol.8, No.1 pp44-46
  12. Udayaprasanna H., Udupa K.R., ‘Dynamic strain ageing in AISI 316L type stainless steel as revealed by indentation creep studies’ Proceedia Engineering  ELSEVIER’-ISSN 1877-7058 , Vol.55, No.1. pp566-572
  13. Udayaprasanna H., Udupa K.R., ‘Comparison of creep rates of AAA 5356 alloy based aluminium silicon carbide composite and AISI 316L stainless steel’, CSIR journal of structural engineering, ISSN 0970-0137, Vol.39, no.4., pp 112-115
  14. Udayaprasanna H., Udupa K.R., ‘Probing the deterioration of 316L stainless steel welds due to ageing and creep by indentation creep tests’ , ELSEVIER Journal of Nuclear Engineering and Design, Vol.16, No.5, pp31-38

- Dr. H. UDAYA PRASANNA

  • Raja Yateesh Yadav, Dr. E S Prakash, “Experimental Determination of Relative Density and Percentage Porosity of Open Cell Aluminium foam Produced from Sand Salt Mould Method”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, 5 Issue 04, April-2016, pp 152-154
  • Raja Yateesh Yadav, Ashok Kumar G P, Sharath D Shetty, “Design and Analysis of Moderate Suction Wind tunnel to study the effect of turbulence on bluff bodies”, International Journal of Innovative and Emerging Research in Engineering (IJIERE), e-ISSN: 2394-3343, p-ISSN: 2394-5494 Vol. 3 Issue 11, November-2016, pp 5-13
  • Raja Yateesh Yadav, Avinash H S, Suhas H C, Prafull Kumar H A, “Thermal Analysis of a Large Shaft in Housing for Shrink Fitting Used in SPM Tools – A FEM approach”, Journal of Industrial Mechanics, Volume 2, Issue 3, 2017, pp 1-10
  • Raja Yateesh Yadav, E S Prakash, “Study of Mechanical Properties of Open Cell Al6061 Alloy Foam”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol. 7, Issue 6, Dec 2017, pp 1-10
  • Raja Yateesh Yadav, D P Girish, “Experimental and Numerical Investigations on Heat Transfer Characteristics of Open Cell Al6061 Alloy Foam”, International Journal of Research, ISSN: 2236-6124; Vol. 8, Issue 6, June 2019, pp 5854-5868
  • Koli Gajanan Chandrashekhar, D P Girish, Katkar Ajit Ashok , Raja Yateesh Yadav, “Improvement of Mechanical Properties of Aluminium 6061 based Metal Matrix Composite with Addition of Granite Particulate”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-9, Issue-7, May 2020, pp 296-298
  • Raja Yateesh Yadav, Chidanand Shankrayya Hiremath, “Development of Eco-friendly Silencer”, Mukt Shabd Journal, ISSN 2347-3150, Volume-IX, Issue-6, June 2020, pp 7166-7170
  • Ganesh Kalagi, Abdulrajak Buradi, Abdul Razak Kaladgi, H.K. Madhusudhana, H Udaya Prasanna, Raja Yateesh Yadav, Asif Afzal, C. Ahamed Saleel “Erosion Wear Behavior of Glass Fiber Hybridized Flax And Sisal Fabric Hybrid Composites With Taguchi Experimental Design”, Elsevier Materials Today Proceedings, Volume 47, Part 17, 2021, Pp 5901-5906. https://doi.org/10.1016/j.matpr.2021.04.430
  • Raja Yateesh Yadav, Manjunatha S, Madhukara Nayak “Study of Performance and Emission Characteristics of Four Stroke Indirect Injection (IDI) Diesel Engine with Diesel-Used Transformer Oil (UTO) Blends”, European Chemical Bulletin, Volume 12, Issue 10, 2023, pp 11501-11508. ISSN: 2063-5346 DOI: 10.48047/ecb/2023.12.10.812
  • Sunil Kumar Shetty, Vidyasagar Shetty, Raja Yateesh Yadav, H.S. Sharathchandra, Udaya Devadiga, T.S. Hemanth, Deepak Kothari, “Optimization of Rolling Process Parameters using ANOVA and FEM Simulation” SSRG International Journal of Mechanical Engineering, Volume 10,  Issue 12, 2023, pp. 19-25. E-ISSN: 2348-8360  https://doi.org/10.14445/23488360/IJME-V10I12P103

Patent published:

  1. Published Indian patent titled “Natural Aspirated Domestic Radiant Porous LPG Burner” on 22 March 2024. (Application No.202441015988 A) Inventors: Shankar Badiger, R.J.Talapati, Shylesha V. Channapattana, Naveen S Hiremath, C.R. Hiremath, Raja Yateesh Yadav
  2. Published a patent titled “Tea Cup and Wick Type Floating Solar Still” on 26 July 2024. (Application No.202441055442 A).  Inventors: Shankar Badiger, R.J.Talapati, Rajat Acharya, Gururaj Hatti, Deepak Lokere, Rashmi Melinamani, Shylesha V. Channapattana, Naveen S Hiremath, C.R. Hiremath, Raja Yateesh Yadav
  3. Published Indian patent titled “Coaxial Tube Type Inverse Diffusion Flame Burner with Swirl” on 25 October 2024. (Application No. 202441079470 A) Inventors: Shankar Badiger, Eshwar Udbal, Mallikarjun Bhovi, Raja Yateesh Yadav, Prasanna Kulkarni, Pradeep N R, Sanjay H M, Deepak V Lokare, Naveen S Hiremath, R.J.Talapati

- Dr. RAJA YATEESH YADAV

  1. Hegde, A., Shetty, R., Dundesh Shivalingappa Chiniwar, Naik, N., & Nayak, M. (2022). Optimization and Prediction of Mechanical Characteristics on Vacuum Sintered Ti-6Al-4V-SiCp Composites Using Taguchi’s Design of Experiments, Response Surface Methodology and Random Forest Regression. Journal of Composites Science, 6(11), 339–339. https://doi.org/10.3390/jcs6110339
  2. Hegde, A., Shetty, R., Naik, N., Murthy, B. R. N., Nayak, M., Kumar, M., & Shanubhogue, D. (2023). Optimization and Prediction of Thermal Conductivity and Electrical Conductivity of Vacuum Sintered Ti-6Al-4V-SiC(15 Wt.%) Using Soft Computing Techniques. Journal of Composites Science, 1–23.
  3. Hegde, A., Shetty, R., Naik, N., Murthy, Nayak, M., Kumar, M., & Deepika Shanubhogue. (2023). Optimization and Prediction of Thermal Conductivity and Electrical Conductivity of Vacuum Sintered Ti-6Al-4V-SiC(15 Wt.%) Using Soft Computing Techniques. Journal of Composites Science, 7(3), 123–123. https://doi.org/10.3390/jcs7030123
  4. Kalagi, G. R., Patil, R., Shetty, S. K., & Nayak, M. (2018). Effect of SiC Nano powder on Multiaxial Woven and Chopped Randomly Oriented Flax/Sisal Fiber Reinforced composites. MATEC Web of Conferences, 144, 02005. https://doi.org/10.1051/matecconf/201814402005
  5. Madhukara Nayak, Narasimha Marakala, Vasanth Kamath, U. Saikrishna “Determinants Of Entrepreneurial Intention Among Engineering Students: Application Of Theory Of Planned Behaviour “International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249–6890; ISSN(E): 2249–8001 Vol. 10, Issue 3, Jun 2020, 8015–8024.
  6. Malikasab Bagawan, Dundur, S. T., Rajesh Gurani, Shetty, R., Nayak, R., S. Divakara Shetty, Nayak, M., & Hegde, A. (2023). Soft computing approach for optimization of turning characteristics of elastomers under different lubrication conditions. Cogent Engineering, 10(2). https://doi.org/10.1080/23311916.2023.2264066
  7. Marakala, N. and Nayak, M. (2021). Significance of Personality traits on the entrepreneurial intention and behaviour of engineering students of coastal Karnataka. International Journal of Business Excellence, 1(1), p.1. https://doi:10.1504/ijbex.2021.10043523
  8. Natesh, C. P., Shashidhara, Y. M., Amarendra, H. J., Shetty, R., Harisha, S. R., Shenoy, P. V., Nayak, M., Hegde, A., Shetty, D., & Umesh, U. (2023). Tribological and Morphological Study of AISI 316L Stainless Steel during Turning under Different Lubrication Conditions. Lubricants, 11(2), 52. https://doi.org/10.3390/lubricants11020052
  9. Natesh, C. P., Shashidhara, Y. M., Amarendra, H. J., Shetty, R., Nayak, R., S. Divakara Shetty, Nayak, M., & Hegde, A. (2023). Soft computing for sustainable drilling of AISI 316L stainless steel under formulated neem oil minimum quantity lubrication condition. Cogent Engineering, 10(2). https://doi.org/10.1080/23311916.2023.2261231
  10. Nayak, M., Nayak, P. M., Birău, R., Wänke, P., & Tan, Y. (2023). Exploring women entrepreneurs’ push–pull motives and challenges: empirical evidence in an emerging economy. International Journal of Sociology and Social Policy. https://doi.org/10.1108/ijssp-09-2023-0210
  11. Nayak R, Shetty R, Nayak M (2015). Influence of Liquid Nitrogen cooling on End Milling of Elastomers. Proceedings of International Conference on Mechanical Engineering and Industrial Automation, Dubai, pp 40-45.
  12. Shetty, R., Gurupur, P. R., Hindi, J., Hegde, A., Naik, N., Ali, M. S. S., Patil, I. S., & Nayak, M. (2022). Processing, Mechanical Characterization, and Electric Discharge Machining of Stir cast and Spray Forming-Based Al-Si Alloy Reinforced with ZrO2 Particulate Composites. Journal of Composites Science, 6(11), 323. https://doi.org/10.3390/jcs6110323
  13. Shetty, R., Hegde, A., Shetty SV, U. K., Nayak, R., Naik, N., & Nayak, M. (2022). Processing and Mechanical Characterisation of Titanium Metal Matrix Composites: A Literature Review. Journal of Composites Science, 6(12), 388. https://doi.org/10.3390/jcs6120388
  14. Nayak, M., Kumar, S., Shetty, R., Adithya Lokesh Hegde and Shetty, D. (2024). Orthogonal array and artificial neural network approach for cutting force optimization during machining of Ti-6Al-4V under minimum quantity lubrication (MQL). AIP conference proceedings. doi:https://doi.org/10.1063/5.0195537.
  15. Nayak, P.M., Joshi, H.G., Nayak, M. and Mathew Thomas Gil (2024b). The moderating effect of entrepreneurial motivation on the relationship between entrepreneurial intention and behaviour: An extension of the theory of planned behaviour on emerging economy. F1000Research, 12, pp.1585–1585. doi:https://doi.org/10.12688/f1000research.140675.2.
  16. Nayak, P.M., Nayak, M. and Joshi, H.G. (2024). Exploring entrepreneurial intentions: integrating Kolb’s experiential learning theory with Ajzen’s theory of planned behaviour. Cogent Social Sciences, 10(1). doi:https://doi.org/10.1080/23311886.2024.2382283.

- Dr. MADHUKARA NAYAK

  1. “Investigation on the performance of an IDI engine using a novel dual swirl combustor.” Materials Today: Proceedings 52 (2022): 1361-1367.
  2. “Performance, emission, and exergy analysis of an IDI dual swirl combustor diesel engine with blended waste Chia seed oil as a biofuel.” International Journal of Ambient Energy 43, no. 1 (2022): 7738-7753.
  3. “Investigative Studies on Performance Behavior on an IDI diesel engine with a Geometrically Modified Swirl Chamber using Biodiesel Blends.” Journal of Mechanical Engineering (JMechE) 20, no. 1 (2023): 77-95.
  4. “Analysis of performance and emission characteristics of a redesigned swirl chamber in an IDI diesel engine with EGR.” In AIP Conference Proceedings, vol. 3060, no. 1. AIP Publishing, 2024.

- Dr. MANJUNATHA S

  1. Bhat, B.K., Adhikari, R. & Acharya, K.K.V. (2020) Numerical Investigation on Human Knee Joint for Verifying Intactness of Anterior Cruciate Ligament. J. Inst. Eng. India Ser. C 101, 861–866. https://doi.org/10.1007/s40032-020- 00582-7
  2. Bhat, B., Adhikari, R. and Acharya, K. (2018). A Numerical Investigation of Anatomic Anterior Cruciate Ligament Reconstruction. The Open Bioinformatics Journal, 11(1), pp.259-274.
  3. Bhat, B., Adhikari, R. and Acharya, K. (2021) Numerical Investigation of Human Knee Joint for understanding the influence of Anterior Cruciate Ligament on the displacement and stress, International Journal of Bioinformatics Research and Application Vol.7, No. 5, 391-405
  4. Bharath K Bhat, Raviraja Adhikari & Kiran Kumar V Acharya | Zhongmin Jin (Reviewing editor) (2022) Anterior cruciate ligament (ACL) reconstruction– A numerical case study, Cogent Engineering, 9:1, DOI: 10.1080/23311916.2022.2101228

- DR. BHARATH K. BHAT

  1. Gajanan Anne, Ananda Hegde, Aditya Kudva S, Priyaranjan Sharma, Prakash Kumar, Mahanthayya Matapati, Ramesh S, S. S. Sharma, “Combined effect of multidirectional forging and heat treatment on erosion and corrosion behaviour of the Mg-Zn-Mn alloys”, Journal of Mechanical Science and Technology 38 (10) 2024 5429~5437. http://doi.org/10.1007/s12206-024-0916-0
  2. Gajanan Anne, Nagaraj Bhat, Vishwanatha H M, Ramesh S, Maruthi Prashanth B H, Priyaranjan Sharma, Aditya Kudva S, C Jagadeesh, Yashwanth Nanjappa, Effect of addition of Ce and accumulative roll bonding on structure-property of the Mg-Ce-Al hybrid composite and its prediction and comparison using artificial neural network (ANN) approach, Materials Research Express,  11 (9) 2024. DOI 10.1088/2053-1591/ad7449
  3. Gajanan Anne, Ramesh S , Priyaranjan Sharma, Maruthi Prashanth B H , Aditya Kudva S, Prakash Kumar, Sandeep Sahu, Nagaraj Bhat, Enhancing wear resistance of AZ61 alloy through friction stir processing: experimental study and prediction model, Materials Research Express,  11 (5) 2024. DOI 10.1088/2053-1591/ad4e0a.
  4. Aditya Kudva S., Gajanan Anne, Ramesh S., Priyaranjan Sharma, Jagadeesh, Lingaraj Ritti, Gajanan Naik,G. Divya Deepak, Enhancing surface characteristics of Mg-Zn-Sr alloy through cryo-ball burnishing;modeling and experimentation, Journal of Mechanical Science and Technology, 38 (3) 2024, DOI 10.1007/s12206-024-0214-x
  5. Ramesh S, Aditya Kudva S, Gajanan Anne, Bhaskar Manne, Shashibhushan Arya, Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg-Zn-Ca alloy and investigation of corrosion behaviour, Materials Research Express, 6 (10) 2019. DOI: 10.1088/2053-1591/ab40f2
  6. B. Vittaldasa Prabhu, Aditya Kudva S, Success of Student Internship in Engineering Industry: A Faculty Perspective, Higher Education for the Future, 3(2) 2016 1–19, https://doi.org/10.1177/2347631116650550

- Mr. ADITYA KUDVA S

  1. “Methylene Blue Colour Removal using physically and chemically activated cashew nut shell activated carbon”, Mallya Ananth Mohan, Dr Mohandas Chadaga, IJTEEER, Vol 2, Issue 7, ISSN 2347-4289, 2014
  2. “Intelligent Braking System and Alcohol Detection based vehicle controlling- A Review”, Tharun K, Sheikh Abdul Wahid, Srinath Samaga B, Sandesh Kumar D, Ananth Mohan Mallya, International Journal of Scientific & Engineering Research, Volume 9, Issue 5, May-2018, ISSN 2229-5518
  3. “Experimental investigation in determining optimum working temperature for a 4- stroke air-cooled motorcycle engine”, Mallya Ananth Mohan, Narasimha Krishna Bailkeri, JOURNAL OF CRITICAL REVIEWS, ISSN- 2394-5125 VOL 7, ISSUE 09, 2020
  4. “Automatic Temperature Control System for A 4-Stroke Air-Cooled Motorcycle Engine for Optimum Fuel Consumption”, Mallya Ananth Mohan, Narasimha Krishna Bailkeri, Tuijin Jishu/Journal of Propulsion Technology, ISSN: 1001-4055, Vol. 44 No. 5 (2023)

- Mr. MALLYA ANANTH MOHAN

 

  1. Rathan Kumar, Pramod, Shrivathsa P, Sharath Devaraj Ganiga, Karthik V, “Smart air purifier – A review”, International Journal of Scientific & Engineering Research, Volume 9, Issue 4, April – 2018, ISSN 2229-5518.
  2. Karthik V, Nagesh B M, “Optimisation of process factors and reduction of product cycle time in manufacturing of an Airbus component beam”, International Journal of Mechanical, Robotics and Production Engineering, Volume V, Issue VIII, September 2015, pp. 25 – 36.

- Mr. KARTHIK V

Admission

Gallery

+ Placement 2024
AGAM@SMVITM
Company Wise Placements 2022-23 Batch Students
Masala Coffee @ SMVITM, Bantakal
2nd PUC Board Exam 2022 Smart Tips by Experts

Accessibility Toolbar