Dr. RAJA YATEESH YADAV

• Raja Yateesh Yadav, Dr. E S Prakash, “Experimental Determination of Relative Density and Percentage Porosity of Open Cell Aluminium foam Produced from Sand Salt Mould Method”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, 5 Issue 04, April-2016, pp 152-154
• Raja Yateesh Yadav, Ashok Kumar G P, Sharath D Shetty, “Design and Analysis of Moderate Suction Wind tunnel to study the effect of turbulence on bluff bodies”, International Journal of Innovative and Emerging Research in Engineering (IJIERE), e-ISSN: 2394-3343, p-ISSN: 2394-5494 Vol. 3 Issue 11, November-2016, pp 5-13
• Raja Yateesh Yadav, Avinash H S, Suhas H C, Prafull Kumar H A, “Thermal Analysis of a Large Shaft in Housing for Shrink Fitting Used in SPM Tools – A FEM approach”, Journal of Industrial Mechanics, Volume 2, Issue 3, 2017, pp 1-10
• Raja Yateesh Yadav, E S Prakash, “Study of Mechanical Properties of Open Cell Al6061 Alloy Foam”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol. 7, Issue 6, Dec 2017, pp 1-10
• Raja Yateesh Yadav, D P Girish, “Experimental and Numerical Investigations on Heat Transfer Characteristics of Open Cell Al6061 Alloy Foam”, International Journal of Research, ISSN: 2236-6124; Vol. 8, Issue 6, June 2019, pp 5854-5868
• Koli Gajanan Chandrashekhar, D P Girish, Katkar Ajit Ashok , Raja Yateesh Yadav, “Improvement of Mechanical Properties of Aluminium 6061 based Metal Matrix Composite with Addition of Granite Particulate”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-9, Issue-7, May 2020, pp 296-298
• Raja Yateesh Yadav, Chidanand Shankrayya Hiremath, “Development of Eco-friendly Silencer”, Mukt Shabd Journal, ISSN 2347-3150, Volume-IX, Issue-6, June 2020, pp 7166-7170
• Ganesh Kalagi, Abdulrajak Buradi, Abdul Razak Kaladgi, H.K. Madhusudhana, H Udaya Prasanna, Raja Yateesh Yadav, Asif Afzal, C. Ahamed Saleel “Erosion Wear Behavior of Glass Fiber Hybridized Flax And Sisal Fabric Hybrid Composites With Taguchi Experimental Design”, Elsevier Materials Today Proceedings, Volume 47, Part 17, 2021, Pp 5901-5906. https://doi.org/10.1016/j.matpr.2021.04.430
• Raja Yateesh Yadav, Manjunatha S, Madhukara Nayak “Study of Performance and Emission Characteristics of Four Stroke Indirect Injection (IDI) Diesel Engine with Diesel-Used Transformer Oil (UTO) Blends”, European Chemical Bulletin, Volume 12, Issue 10, 2023, pp 11501-11508. ISSN: 2063-5346 DOI: 10.48047/ecb/2023.12.10.812
• Sunil Kumar Shetty, Vidyasagar Shetty, Raja Yateesh Yadav, H.S. Sharathchandra, Udaya Devadiga, T.S. Hemanth, Deepak Kothari, “Optimization of Rolling Process Parameters using ANOVA and FEM Simulation” SSRG International Journal of Mechanical Engineering, Volume 10,  Issue 12, 2023, pp. 19-25. E-ISSN: 2348-8360  https://doi.org/10.14445/23488360/IJME-V10I12P103

Patent published:

1. Published Indian patent titled “Natural Aspirated Domestic Radiant Porous LPG Burner” on 22 March 2024. (Application No.202441015988 A) Inventors: Shankar Badiger, R.J.Talapati, Shylesha V. Channapattana, Naveen S Hiremath, C.R. Hiremath, Raja Yateesh Yadav
2. Published a patent titled “Tea Cup and Wick Type Floating Solar Still” on 26 July 2024. (Application No.202441055442 A).  Inventors: Shankar Badiger, R.J.Talapati, Rajat Acharya, Gururaj Hatti, Deepak Lokere, Rashmi Melinamani, Shylesha V. Channapattana, Naveen S Hiremath, C.R. Hiremath, Raja Yateesh Yadav
3. Published Indian patent titled “Coaxial Tube Type Inverse Diffusion Flame Burner with Swirl” on 25 October 2024. (Application No. 202441079470 A) Inventors: Shankar Badiger, Eshwar Udbal, Mallikarjun Bhovi, Raja Yateesh Yadav, Prasanna Kulkarni, Pradeep N R, Sanjay H M, Deepak V Lokare, Naveen S Hiremath, R.J.Talapati

1. Raja Yateesh Yadav, Dr. E S Prakash, J.Radhakrishna Murthy, “Prediction of Thermally induced residual stresses during heat treatment of forged railway wheel” Proceedings of National conference on “Trends and Advances in Manufacturing Engineering” (TAME-2011), pp 131-134, 29-30 Sept 2011, P.E.S Institute of Technology, Bengaluru.
2. Jimson John, Raja Yateesh Yadav, Ravindra Babu G, “Study of Emission Characteristics of Four Stroke Diesel Engine using Biodiesel Extracted from Cotton Seed Oil” Proceedings of National conference on “Emerging Trends in Environment and Energy Management” (NCEEM-2013), pp 12-15, 18-19 Oct 2013, Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi Dist.
3. Raja Yateesh Yadav, Chidanand Shankrayya Hiremath, “Development of Eco-friendly Silencer” Proceedings of 2^nd International conference on “Advances in Mechanical Engineering Sciences” (ICAMES-2020), pp 25, 28-29 February 2020, P.E.S. College of Engineering, Mandya. (ISBN:978-93-89107-80-7)
4. Raja Yateesh Yadav, Vinay Desai, “Development of Solar Operated Multipurpose Portable Cutting Machine” Proceedings of 1^st International conference on Renewable Energy and Green Technology (ICREGT-2020), pp 21, 09-10 October 2020, organized by Department of EEE, SRM Institute of Science and Technology, Ghaziabad. (U.P) (ISBN: 978-81-946241-5-8)
5. Ganesh Kalagi, Abdulrajak Buradi, Abdul Razak Kaladgi, H.K. Madhusudhana, H.Udaya Prasanna, Raja Yateesh Yadav, Asif Afzal, C. Ahamed Saleel “Erosion wear behavior of glass fiber hybridized flax and sisal fabric hybrid composites with taguchi experimental design”, Proceedings of 1^st  International conference on “Technology Innovation in Mechanical Engineering” (TIME-2021), organized by Department of Mechanical Engineering, Sagar Institute of Science & Technology, Bhopal, Madhya Pradesh on 10-11 May 2021.
6. Raja Yateesh Yadav, Manjunatha S “A study on Emission and Performance characteristics of IDI diesel engine using Methanol and Ethanol biodiesel blends”, Proceedings of 3rd International Conference on “Recent Trends in Mechanical Engineering Sciences” (RTIMES-2024) organized by Srinivas Institute of Technology, Valachil, Mangaluru on 10-11 May 2024.

1. Attended one week Faculty Development Program on “Research Methods for Business Management and Social Sciences”, organized by Department of Business Administration, Sahyadri College of Engineering & Management, Mangaluru from 23^rd to 29^th July 2012.
2. Attended two week ISTE workshop on “Engineering Thermodynamics”, under the National Mission on Education through ICT (MHRD, Govt. of India) organized by IIT Bombay at Srinivas Institute of Technology, Valachil, Mangaluru from 11^th to 21^st December 2012.
3. Attended three days National workshop on “Cutting Edge Technologies for Diesel Engines”, organized by Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal from 20^th to 22^nd March 2013
4. Attended one day workshop on “Computational Mechanics”, organized by Department of Civil Engineering, Sahyadri College of Engineering & Management, Mangaluru on 18^th May 2013.
5. Attended ISTE-PTU Faculty Development Program on “Computational Methods and FEA in Mechanical Sciences” organized by Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi, sponsored by Indian Society for Technical Education, New Delhi and Punjab Technical University, Jalandar from 7^th to 11^th July 2014.
6. Attended Faculty Development Program on “Application of Statistical and Neural Network Techniques in Engineering” organized by Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi, under ISTE faculty chapter on 6^th and 7^th June 2016.
7. Attended TEQIP-II sponsored two days National workshop on “Biofluid Dynamics and Bioheat Transfer”, organized by Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal on 20^th and 21^st February 2017.
8. Attended two days National workshop on “Emerging Technologies in Solar and Wind Energy” organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal on 21^st and 22^nd July 2017.
9. Undergone six days intensive training on counselling skills held at Shri Madhwa Vadiraja Institute of Technology & Management, Bantakal from 04^th to 9^th December 2017 in association with Alva’s Counselling Center, Moodabidri.
10. Attended five day Faculty Development Program on “Research Methodology” and “Enhancing Teaching Methodology” held at Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi from 11^th to 15^th December 2017.
11. Participated in one day Faculty Development Programme on “LEAD– Leadership Empowerment and Development” organized by ISTE Faculty chapter of Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi in association with Golden Heritage Academy of training and Development, Mumbai on 24^th January 2018.
12. Attended one week AICTE-ISTE Induction/Refresher Program on “Recent Advances in I.C.Engines- Research & Issues” organized by Department of Mechanical Engineering, G.M. Institute of Technology, Davangere from 23^rd to 28^th July 2018.
13. Attended one week Short Term Training Programme through ICT mode on “Problem Based Learning” organized by National Institute of Technical Teachers Training and Research, Kolkata from 11^th to 15^th February 2019 at Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi.
14. Attended one week AICTE-VTU joint training programme for teachers on “An overview of teaching techniques in Turbomachines” organized by VTU Human Resource Development Cell at VTU Centre for Post Graduate Studies at Muddenahalli, Chikkaballapur from 22^nd to 26^th July 2019.
15. Completed one week NPTEL-AICTE Faculty Development Programme on “Developing Soft skills and Personality” with a consolidated score of 76%. (August-October 2019 course)
16. Participated in Two week Faculty Development Program on “LaTex” organized by Gopalan College of Engineering and Management, Bengaluru in association with IIT Bombay-Spoken Tutorial from 17^th to 30^th April 2020 and successfully cleared the LaTex exam. (Through online mode during Lockdown period)
17. Participated in one week International Faculty Development Program (online) on “Potential Research Areas in Mechanical Engineering” from 15^th to 20^th June 2020 organized by Department of Mechanical Engineering, Vignan Institute of Technology & Science, Hyderabad. (Through online mode during during COVID-19 pandemic)
18. Participated in a Four days hands-on workshop on “LaTex” organized by ISTE faculty chapter of Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal from 01^st to 06^th July 2020.
19. Attended one week Faculty Development Programme on “Basic Concepts in Turbo Machinery and its Applications” organized by Department of Mechanical Engineering, The National Institute of Engineering, Mysuru from 24^th to 28^th August 2020. (Through online mode during COVID-19 pandemic)
20. Successfully completed 30 hours of online course on “Basics of strategic Management- its relevance in the present situation” organized by the Internal Quality Assurance Cell of SMVITM, Bantakal from July-September 2020.
21. Participated in one week Faculty Development Programme on “Sustainable Energy Solutions in Solar Energy Applications” organized by Department of Mechanical Engineering, Mangalore Institute of Technology and Engineering, Moodabidri from 23^rd to 27^th November 2020. (Through online mode during COVID-19 pandemic)
22. Completed one and half week NPTEL-AICTE Faculty Development Program on “Thermal Operations in Food Process Engineering: Theory and Applications” with a consolidated score of 84%. (September-December 2020 course)
23. Attended Five Days Faculty Development Program on “Advances in Materials and Manufacturing Engineering” organized by the Department of Mechanical Engineering, in association with ISTE Faculty Chapter, SMVITM, Bantakal from 28^th December 2020 to 1st January 2021.
24. Successfully completed AICTE-ISTE approved Orientation/Refresher Programme on “Thermal Engineering” organized by Kalpataru Institute of Technology, Tiptur from 17^th February 2021 to 23^rd February 2021.
25. Attended Six Days Faculty Development Program on “OBE and Engineering Education Research” organized by Internal Quality Assurance Cell (IQAC) of SMVITM, Bantakal from 25^th September 2021 to 07^th October 2021.
26. Participated and successfully completed one week AICTE–VTU Joint Teachers Training Programme on “Universal Human Values – An Overview” from 02^nd to 06^th March 2022, organized by VTU Human Resource Development Centre (VTU-HRDC), Centre for PG Studies, Muddenahalli, Chikkaballapur Dist.
27. Attended five days Faculty Development Program on “Electric Vehicle and Smart Grid” from 14th to 18th March 2022, jointly organized by Department of Electronics & Communication Engineering and Department of Mechanical Engineering, Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi.
28. Completed one week NPTEL-AICTE Faculty Development Program on “Plastic Waste Management” with a consolidated score of 77%. (August-October 2022 course)
29. Completed one and half week NPTEL-AICTE Faculty Development Program on “Cooling Technology: Why and How utilized in Food Processing and allied Industries” with a consolidated score of 75%. (January-April 2024 course)